Monday Morning Good News

Nov. 2, 2009

The following news release popped up in my mailbox this morning, forwarded by Walt. (Hey, boss! You're supposed to be resting!) A bit of light at the end of the tunnel, in spite of yet another big financial institution meltdown.

The following news release popped up in my mailbox this morning, forwarded by Walt. (Hey, boss! You're supposed to be resting!) A bit of light at the end of the tunnel, in spite of yet another big financial institution meltdown.

October CMI Breaks Into Expansion Territory
Manufacturing Return Unseats Great Recession

 
Columbia, Maryland: November 2, 2009—Is the recession truly over? Most of the evidence says “yes,” although there will be problems to contend with for the next few months. In many ways, the best way to characterize the situation is to say that the beatings on the economy have stopped, but that every bone has been broken. The recovery started slowly in the last few months and will continue to progress slowly and not without some reversals from time to time, but news of the last few days of October has been especially solid with the third quarter GDP numbers stronger than anticipated—3.5% growth after four quarters in the negative category. Even more significant from the perspective of credit availability is that the CMI has broken past the 50 neutral barrier for the first time in over a year. The index started in that direction in September when the service side of the equation improved to 50.1, but manufacturing still lagged, finishing at 49.6. Now both sectors are showing expansion and the CMI as a whole is pointing toward growth.

The significance of these findings is hard to overestimate given the kind of analysis taking place around the improved GDP numbers. The dominant theme is that four factors were at work with third quarter GDP: the impact of the stimulus package, the “Cash for Clunkers” program, the $8,000 new home-buyer credit and the Fed keeping interest rates low. These are all important factors, but are not the only ones at work—the CMI data makes this pretty clear. The private sector is also engaging in this economic comeback with the CMI tracking this activity in both the service and manufacturing sectors.

This month, progress was made in both the positive and negative indicators in contrast to the numbers in September where the majority of the progress was in the negative indicators. NACM’s Economic Analyst Dr. Chris Kuehl said that there were two streams of good news, “Not only has there been some expansion in terms of credit availability, but there continues to be evidence that companies are catching up on their debt. Over the last few weeks, I have spoken at a several NACM events and have heard similar stories at each. Companies that had been behind in their obligations are catching up in anticipation of further growth and the need to ask for more credit in the future. By the same token, comments by attendees suggest that there is more money starting to filter into the system, making credit more accessible than it has been in some time.”

The CMI data show a significant improvement in dollar collections and that the amount of credit extended is higher than it has been in well over a year. There were also far fewer accounts placed for collection and fewer applications rejected. This latter point is important to note as one would expect more rejections in a much more restrictive credit environment. This means that many of the applicants are more creditworthy than they have been in past months.

Manufacturing Sector
The manufacturing sector finally crested the 50 mark this month, a long-awaited development and one that is consistent with other economic data coming from the industrial community as a whole. “After falling just short of the growth mark in September at 49.6, manufacturing numbers are now past the neutral zone and are standing at 51.2,” said Kuehl. “This is a pretty sharp gain given the slow development over the last several months. While it took from July to September to move 1.3 points, it only took one month for the sector to move 1.6 points to reach October’s numbers. This is rapid expansion by any measure.”

As noted in September’s report, the data has been building to this point. In past years, when it appeared that creditors were starting to see their clients catch up, there was a delay of about a month or two before the manufacturers started to see more business. This pattern is nearly always the same. The companies that are in financial distress to some degree or another slow down payments and try to stretch dollars, even to the point of irritating their suppliers. Now that growth is nearing, these same manufacturers are gearing up by catching up. They are starting to bring in more raw materials, which is the predecessor to more production. That this is happening at a national level is represented by the rise in GDP numbers and the improvement in other indexes such as the Purchasing Managers Index (PMI) issued by the Institute of Supply Management. Right now the CMI and PMI are mirroring each other and that is generally a good sign for the manufacturing sector.

There remains a considerable way to go before the entire sector is nearly healthy, but the trends are moving in the right direction. From this point on, the critical factor will be consumer demand and the improvements that show up in trade.

Service Sector
The big gains in September were in the service sector as the index moved from 48.2 to 50.1. This pattern was not repeated in October even though the sector still maintained some momentum, moving from 50.1 to 50.9. The manufacturing sector has rapidly jumped ahead of service in the race toward growth and that may reflect some retail reticence about the coming holiday season. There is still a sense that inventories will be held to lower-than-usual levels. This is affecting sales and the number of credit applications and also putting less pressure on the part of retailers to catch up with their suppliers.

Kuehl noted that “there seems to be some trepidation in the health care sector as well. This industry is booming, but there is also concern that changes from the as-yet-defined health care plan will impact them and many are in a state of some confusion. Disputes have been up, which may suggest that this is more about a fear of the future than of current conditions.”

The good news from the service side is that there is still growth despite the challenges, providing optimism that the November numbers will be more impressive.

October 2009 vs. October 2008
“The year-over-year comparison is finally showing a clear trend toward growth,” said Kuehl. The index holds that anything under 50 indicates contraction and that numbers over 50 are growth indicators. “The climb has been steep and awkward and the numbers are still far from robust, but the trend is clearly headed in the right direction,” he said. “The comparison to October of last year is stark and, for the next few months, the emerging numbers will make last year’s collapse all the more dramatic.”
About the National Association of Credit Management

This report, complete with tables and graphs, and the CMI archives may be viewed at http://web.nacm.org/cmi/cmi.asp.

Sponsored Recommendations

Make Effortless HMI and PLC Modifications from Anywhere

The tiny EZminiWiFi is a godsend for the plant maintenance engineers who need to make a minor modification to the HMI program or, for that matter, the PLC program. It's very easy...

The Benefits of Using American-Made Automation Products

Discover the benefits of American-made automation products, including stable pricing, faster delivery, and innovative features tailored to real-world applications. With superior...

50 Years of Automation Innovation and What to Expect Next

Over the past 50 years, the automation technology landscape has changed dramatically, but many of the underlying industry needs remain unchanged. To learn more about what’s changed...

Manufacturing Marvels Highlights Why EZAutomation Is a Force to Be Reckoned With

Watch EZAutomation's recent feature on the popular FOX Network series "Manufacturing Marvels" and discover what makes them a force to be reckoned with in industrial automation...